Rizal Chapter 22

ZAMBOANGA CITY STATE POLYTECHNIC COLLEGE COLLEGE OF EDUCATION
Direction: encircle the letter of the correct answer.
1. This is a kind of saw that is used for ripping purposes

a. crosscut saw
b. a rip saw
c. miter said.
d. the dovetail saw

2. The kind of chisel with a light-duty tool used to plane long surfaces parallel with the grain of the wood.

a. Paring chisels. Pocket chisel
b. firming chiseled. Mill chisel

3. A chisel with heavy-duty tool adopted to withstand the severe strain, as in framing work and where deep cuts are necessary.

a. pocket chisels. Paring chisel
b. firming chiseled. Mill chisel

4. The kind of saw that is being used for crosscutting purposes. a. miter saw.

a. rip saw
b. dovetail said

5. A kind of rough facing tool which is generally used for sharpening stakes and cutting down timber to rough sizes.

a. Ship added. Hatchet
b. Broad. Claw hammer

6. The other name for smooth facing tools is?

a. driving tools.
b. Rough facing tools
c.. tooth cutting tools.
d. Edge cutting tools

7. The plane that consists of 28 to 30 inches long is the?

a. jointer planes. Fore plane
b. jack paned. Smooth plane

8. Classification of tools that are specially designed to make holes in wood.

a. tooth cutting tools. Smooth cutting tools
b. boring tools
c. Edge cutting tools

9. It is a kind of plane that is being used for making a sinking cut on wood to make them fit to each other.

a. Rabbet planes.
b. Grooving plane.
c. Fillister planed.
d. Router

10. This is a kind of boring tool which is small and used for punching or piercing small holes. it is generally used in starting a nail or screw into the hardwood

a. brad awls. Auger
b. gimlet. Cutter bit

Test 11: Modified True or False Direction: Write the word true if the answer is true, and change the underlined word of the statement if the answer is false.
Write your answer on the space provided for

Vice is a table tool used to hold a piece of material rigidly secured in place to absorb severe elbows. _____________
Compass is used in dividing distances into equal parts such as an arc and circumference including straight lines. ___________
Scriber is made up of hard ended steel with a sharp point design to mark a fine line. __________
Clamps are effective in tightly pressing pieces of wood or metal together in making tenon, mortise, and other joints. _________
Fillister plane is used in cutting across the wood grain. _________
Claw hammer is a hand tool with head and shank used for turning screws. ________
 Wrenches are tools with hand and jaw which may be fitted to the head of the nut used to tighten or loosen the bolts. __________
Oil stone is used after the grinding operation to achieve a smooth and keen edge of the tools. ________
Rough facing tools are also called striking tools. _________
 In carpentry, we use Level both for guiding and testing the work to a vertical or horizontal position. _________

Test 111: Fill in the blank Direction: Choose the correct answer on the box and write it in the blank.

The defects in wood that usually occur at the starting point of the limb or branch Of the wood is called the ___________.
The _________ are radial cracks originating at the heart of the logs.
We used the term _________ to the operation performed in preparing wood for commercial purposes.
The process of sawing into smaller pieces after the removal of the branches is what we called the _________.
Te term ________ means that pieces of logs are moved to an assembly area, loaded to transport equipment then carried out of the forest to a sawmill.
As applied to wood, ________ means the ability to resist decay or simply the end of its life under a given condition.
The resistance of the wood to cleavage along the grains is the _________.
________ is expressed as resistance to an indentation or to the saw or ax across the grain.
A ________ is a fibrous substance which composes the trunk and branches of a tree that lies between the pitch and the bark.
In the preparation of wood, ________ is a piece of lumber less than 1-1/2 inches thick and at least 4 inches wide.

Test 1V: Identification Direction: Identify the correct answer to the statement below.

________ the kind of tool used for marking and testing work which has a 90-degree angle.
________ is a tool which has a combination of 45 and 90-degree angle.
________ the longer and wider part of the framing square.
________ this is the shorter and narrower part of the square.
________ the point of the square which the tongue and body meet on the outside edge.
________ is a device used as a guide of the handsaw in cutting objects to form a miter joint.
________ a metal tool used to check or obtain a vertical line.
________ double bevel square used to divide an angle in a complicated work in one setting.
________ a marking tool with a round head used for marking rough works.
 _______ is a kind of marking tool that is used to inscribe an arc or a circle.

Place your order
(550 words)

Approximate price: $22

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
$26
The price is based on these factors:
Academic level
Number of pages
Urgency
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Read more

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Read more

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Read more

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Read more

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.

Read more